Performing The Upgrade; Starting The Upgrade - ATEN ALTUSEN KH1516 User Manual

KH1508 / KH1516 User Manual
Note: On a daisy chained installation, connect the cable to the First Station
(Master) unit. The chained stations (Slaves) will receive the upgrade
via the daisy chain cables.
4. Shut down all of the computers - but not the Stations - on your KVM
installation.
5. From your KVM switch console, bring up the OSD (see page 21) and
select the F4ADM function.
6. Scroll down to FIRMWARE UPGRADE. Press [Enter], then press [Y] to
invoke Firmware Upgrade Mode. (see page 31.) For your reference, the
current firmware upgrade version displays on the screen.

Performing the Upgrade

Starting the Upgrade:

To upgrade your firmware:
1. Run the downloaded Firmware Upgrade Package file - either by double
clicking the file icon, or by opening a command line and keying in the full
path to it.
The Firmware Upgrade Utility Welcome screen appears:
2. Read and Agree to the License Agreement (enable the I Agree radio
button).
44