Safety Label; Purpose Of This Manual; Notes On Use; Notes On Installation - Epson TM-P60 User Manual

Safety Label

CAUTION:
During printing or after printing, the thermal head can be very hot.

Purpose of This Manual

This manual provides information to operators of the TM-P60 printer to describe
basic operations to enable safe and correct use of the printer.

Notes on Use

❏
Be sure to use the power switch to turn the printer on and off.
❏
Do not unplug or plug in the AC adapter during printing.
❏
Be sure not to open the roll paper cover when the printer is operating.
❏
Protect the printer from impact.
❏
Do not apply excessive force to the printer case.
❏
Do not place food or beverages such as coffee on the case of the printer.
❏
Time required before start of printing:
If you establish a radio connection between the host computer and the printer
each time you start printing instead of maintaining the connection, it may
take a while between the time you send a print job and the time that the
printer actually starts printing. This happens because connecting the host
computer and the printer requires some time. The time required for
connection depends on the operating environment.
❏
Timing of disconnecting radiowaves:
Even if data has already been transferred from the host application, some
data may still remain in the buffer inside the printer. Because any remaining
data in the buffer may be deleted when the wireless connection is ended, be
sure to confirm that all the transferred data has been printed completely by
using a status sheet when printing or before disconnecting.

Notes on Installation

❏
Be sure that the printer is installed horizontally when you install it on a table.
❏
Be sure that the roll paper side is on the bottom when you install the printer
vertically.
Notes on the Rechargeable Battery
Before using the printer for the first time, charge the battery. The safety
precautions for the rechargeable battery are described previously in this manual.
For more details, see the battery instructions that came with the printer.
Notes on AC Adapter
Use the specified AC adapter (EPSON PS-10, Model: DA-42Y12) only.
Power Supply Cable Requirements
For US and Canada:
UL and CSA Approved;
Plug: AC125V, 7A or more, NEMA 5-15P,
Cable: 6 to 10 feet long, 3*AWG 18, SPT-2 or heavier,
TM-P60 User's Manual (Bluetooth) 5
English