Page 1
MAGNETIC CYCLE 1900 SERIES Owner's manual...
Page 2
PEC-1900 SERIES HOME MAGNETIC CYCLE ASSEMBLY INSTRUCTION THIS OWNER'S MANUAL CONTAINS ASSEMBLY, OPERATION, MAINTENANCE AND SAFETY INFORMATION. IN THE INTEREST OF SAFETY, PLEASE MAKE CERTAIN THAT YOU READ AND UNDERSTAND ALL THE INFORMATION BELOW. Important safety precautions 1. Read the owner's manual and all accompanying literature and follow it carefully before using your machine.
Page 3
Warning : Before commencing with any exercise program, please consult your family physician. If at any time during exercise you feel faint, dizzy or experience pain, stop and consult your family physician. In the event any of the above mentioned warnings are breached by the consumer, the manufacturer may use same as a defense to any claim for injuries, damage or loss.
Page 4
MAGNETIC CYCLE ASSEMBLY INSTRUCTION Step 1. Attach both front and rear stabilizers ( 2/3 ) to main frame ( 01 ), fix with carriage bolts ( 27 ) washers ( 30 ) and dome nuts ( 34 ). Step 2. IMPORTANT : READ ALL STEPS BEFORE ATTACHING PEDALS a.
Page 5
( Please refers to FIG. D ) d. Slide the monitor into mounting plate carefully. **** Now your PEC-1900 series has been well assembled. **** " THE BATTERIES MUST BE REMOVED FROM THE APPLIANCE BEFORE IT IS SCRAPPED AND THAT THEY ARE DISPOSED OF SAFELY ".
PARTS LIST Q'ty Description Main frame Front stabilizer Rear stabilizer Seat post Handlebar post Handlebar Crank assembly Cyclemonitor Tension control Tension cable Wire ( A ) Wire ( B ) Saddle Knob 60 sleeve Handlebar end cap Foam grip Pedal ( R ) Pedal ( L ) Chain cover ( R ) Chain cover ( L )