Dish Network TR-40CRA User Manual page 13

TR-40CRA D
5 To connect your TR-40CRA converter to your TV using a coaxial cable:
a Connect one end of the coaxial cable to the TV's A
b Connect the other end of the coaxial cable to the TV S
on your TR-40CRA converter.
6 To connect your TR-40CRA converter to your TV using composite cables
(red, white, and yellow RCA-type).
a Connect the composite cables to the TV's RCA-type composite input.
b Connect the other end of the cables to the A
your TR-40CRA converter.
7 Plug the TR-40CRA power adapter into the power adapter plug on the back
of your TR-40CRA converter. Plug the other end into an electrical outlet.
Make sure your TV also is plugged in to power.
Using the Installation Wizard
8 Install the two included AAA batteries in the TR-40CRA remote control. Be
sure to follow the battery installation diagram printed on the remote control.
9 Turn on your TV using the TV's remote control or front panel button.
10 Change your TV to the correct channel or input to view your TR-40CRA.
a If your TV is connected to your TR-40CRA converter using the coaxial
connection (step 5), set the TV to channel 3, which is the default output
channel for the TR-40CRA.
Note: If you have a local or cable channel that broadcasts on channel 3,
you can change the output setting for your TR-40CRA converter to
channel 4 during the Installation Wizard, described below.
b If your TV is connected using the RCA-type connection (step 6), you will
need to set the TV to the correct video input or source. Most TV remote
controls have a VIDEO, INPUT, or SOURCE button that you can use to
change the TV's video input or source. Refer to your TV's user guide for
additional help changing the TV's input or source.
11 The first time your
converter turns on, an
Installation Wizard screen
appears and guides you
through the setup process.
The Installation Wizard
scans for local digital over-
the-air channels, and helps
you set up the time zone
and TV display settings.
- -A
IGITAL TO
TV C
NALOG
NTENNA
ET
/V
UDIO IDEO
Installation Wizard
ONVERTER
I
NSTALLATION
I connection.
N
O connection
UT
connections on
Page 3