Camera - Misc 2 - Grundig GCI-K0779P Owner's Manual

NOTE: The Privacy Mask function will be automatically disabled when the Image Flip function is enabled.
Speed by Zoom :
Enable this function to adjust the pan/tilt speed automatically by an internal algorithm when zooming. A larger
zoom ratio leads to a lower rotation speed. Click on the <Set> button to save the setting.
ICR Function :
When you detach the IR cut filter from the image sensor and turn off the colour burst function, you will get a
black-and-white picture. The light does not have to go through the filter any more, therefore more light enters
the image sensor and a clearer picture, while the same light conditions persist, will be displayed. As a result, the
sensor's sensitivity to light will be enhanced. Without the IR cut filter the image sensor can now also process IR-
"light".
- Auto:
In Auto mode, the internal circuit will automatically decide to remove the IR cut filter according to the image
brightness level (if necessary).
- On:
Select this item to remove the IR cut filter.
- Off:
Select this item to disable the IR function.

11.11. Camera - Misc 2

In Camera — Misc (Miscellaneous Setups) 2, users can set up various functions such as Auto Calibration, Wide
Dynamic Range (WDR) and 2D Noise Reduction.
WDR :
The WDR function is especially effective in an environment with extreme contrast. Click on the "Set" button when
the setting is finished.
Auto calibration :
With the Auto calibration function, the Motordome Camera calibrates automatically when the deviation of dome
pivot is detected. Click on the "Set" button when the setting is finished.
81 English