Advertisement
CLEANING/MAINTENANCE
INSTRUCTIONS
NOTE: If your unit stops grinding, the chute may be clogged.
To unclog, first unplug your grinder and then use the
scoop brush to clear out the chute of excess grounds.
HOPPER
1. Unplug unit.
2. Beans can be removed from the hopper by lifting off
the lid and rotating the knob to the "unlock" position.
Once unlocked, the hopper can be removed to pour
out remaining beans.
BURR GRINDER
1. After removing hopper, if some beans remain in the
grinder, put hopper back on, re-insert the grind con-
tainer or filter and run a grind cycle for 8 cups on any
grind setting. Once finished, you can continue cleaning
as instructed.
2. Rotate the grind selector dial counterclockwise until
dial stops. OFF will be indicated on LCD.
3. Unplug unit.
4. Remove the bean hopper lid and turn the
lock/unlock dial counterclockwise to release the
bean hopper. NOTE: You will notice the release arrow
and arrow on the burr on the inside of unit are now
aligned. They must be aligned in order to re-insert the
hopper.
5. Once the bean hopper has been removed, remove
the burr grinder by grasping the metal handle and lifting
up. Use the brush to remove grinds or wash by hand.
Replace the burr grinder on the unit and rotate until the
piece is fully inserted. Push handle down, replace and
lock hopper.
Note: The hopper will not attach to the unit if the grind-
er has not been fully inserted. The brush on the mea-
suring scoop is only for cleaning purposes.
6. Wipe body of grinder with a damp cloth.
NOTE: The bean hopper, bean hopper lid, grind chamber, and
grind chamber lid can be washed by hand with hot,
soapy water or placed in the top shelf of a dishwasher.
Dry thoroughly.
MAINTENANCE
Any other servicing or maintenance should be performed by
an authorized service representative.
WARNING: NEVER IMMERSE UNIT IN WATER.
9
Advertisement
