If you prefer, after selecting your grind setting, you have the
option of manually controlling how much coﬀ ee the unit will
grind. To do so, follow steps 1-4 on previous page. Th en press
and hold the manual button until the desired amount of coﬀ ee
has been ground. Th e LCD will display M.
NOTE: To avoid overﬂ ow when using the manual feature, the
grinder will automatically stop grinding when the maximum
capacity has been reached.
When selecting your grind setting remember that the higher the
number the coarser the grind. Use 1-6 for Espresso, 7-12 for
Auto Drip, and 13-18 for French Press.
1. Be sure plug has been removed from outlet.
2. Beans can be removed from the hopper by lifting off the lid
and pouring excess beans out. Hold down the Manual button
to cleanout any remaining beans.
3. The bean hopper, bean hopper lid, grind chamber, and grind
chamber lid can be washed by hand with hot, soapy water or
placed in the top shelf of a dishwasher. Dry thoroughly.
a. Remove the bean hopper by rotating counter-clockwise
bringing the selector past grind setting 18, align the
arrows and lift up. Make sure the hopper is empty.
b. Remove grind chamber by pulling toward you.
4. Remove the burr grinder, once the bean hopper has been
removed, by grasping the metal handle and lifting up. Use
the brush to remove grinds or wash by hand. Replace the
burr grinder onto the unit and rotate until the piece is fully
inserted. Push handle down and replace hopper.
NOTE: The hopper will not attach to the unit if the
grinder has not been fully inserted.
5. Wipe body of grinder with a damp cloth.
6. Any other servicing or maintenance should be performed by an
authorized service representative.
WARNING: NEVER IMMERSE UNIT IN WATER
Th e Cuisinart® Programmable Conical Burr Mill carries a Limited
3-year Warranty. Th is warranty is available to consumers only.
You are a consumer if you are the owner of a Cuisinart® Programmable Conical
Burr Mill that was purchased at retail for personal, family, or household use.
Except as otherwise required, this warranty is not available to retailers or other
commercial purchasers or owners. We warrant that should your Cuisinart®
Programmable Conical Burr Mill prove to be defective within the warranty
period, we will repair it or replace it at our option, without charge to you.
If you bought the product in Hong Kong, please login to
for warranty registration.
Conair Far East Ltd. Customer Service Center:
35/F., Standard Chartered Tower, Millennium City 1,
388 Kwun Tong Road, Kwun Tong, Kowloon, Hong Kong
Customer Service Hotline: (852) 2751 4604
Chinese version is taken as standard for guarantee period and
Conair Far East Ltd.,
A subsidiary of Conair Corporation USA
Conair Corporation USA,
1 Cummings Point Road, Stamford,
Connecticut 06902 USA
Conair Far East Ltd., 35/F.,
Standard Chartered Tower,
Millennium City, 388 Kwun Tong Road,
Kwun Tong, Kowloon, Hong Kong
Programmable Conical Burr Mill
Printed in China