× Bookmark added
Page of 6
Download

Cuisinart CBM-18A Operating Instructions Manual

Programmable conical burr mill.
Hide thumbs
   

Advertisement

NOTE: To avoid overflow when using the manual feature, the
grinder will automatically stop grinding when the maximum
capacity has been reached.
GRINDING SETTINGS
When selecting your grind setting remember that the higher the
number the coarser the grind. Use 1-6 for Espresso, 7-12 for
Auto Drip, and 13-18 for French Press.
CLEANING/MAINTENANCE
INSTRUCTIONS
1. Be sure plug has been removed from outlet.
2. Beans can be removed from the hopper by lifting off the lid
and pouring excess beans out. Hold down the Manual button
to cleanout any remaining beans.
3. The bean hopper, bean hopper lid, grind chamber, and grind
chamber lid can be washed by hand with hot, soapy water or
placed in the top shelf of a dishwasher. Dry thoroughly.
a. Remove the bean hopper by rotating counter-clockwise
bringing the selector past grind setting 18, align the
arrows and lift up. Make sure the hopper is empty.
b. Remove grind chamber by pulling toward you.
4. Remove the burr grinder, once the bean hopper has been
removed, by grasping the metal handle and lifting up. Use
the brush to remove grinds or wash by hand. Replace the
burr grinder onto the unit and rotate until the piece is fully
inserted. Push handle down and replace hopper.
NOTE: The hopper will not attach to the unit if the
grinder has not been fully inserted.
5. Wipe body of grinder with a damp cloth.
6. Any other servicing or maintenance should be performed by an
authorized service representative.
WarNiNg: NEvEr immErsE uNiT iN WaTEr
WARRANTY
The Cuisinart® Programmable Conical Burr Mill carries a Limited
3-year Warranty. This warranty is available to consumers only.
You are a consumer if you are the owner of a Cuisinart® Programmable Conical
Burr Mill that was purchased at retail for personal, family, or household use.
Except as otherwise required by applicable state law, this warranty is not
available to retailers or other commercial purchasers or owners. We warrant
that should your Cuisinart® Programmable Conical Burr Mill prove to be
defective within the warranty period, we will repair it or replace it at our
option, without charge to you. To obtain warranty service, please register your
warranty online at www.cuisinart.com.au

Advertisement

   Related Manuals for Cuisinart CBM-18A

   Summary of Contents for Cuisinart CBM-18A

  • Page 1

    The Cuisinart® Programmable Conical Burr Mill carries a Limited 3-year Warranty. This warranty is available to consumers only. You are a consumer if you are the owner of a Cuisinart® Programmable Conical Burr Mill that was purchased at retail for personal, family, or household use.

  • Page 2

    BEFOrE rETurNiNg YOur CuisiNarT PrODuCT important: If the nonconforming product is to be serviced by someone other than Cuisinart’ s Authorized Service Centre, please remind the servicer to call our Consumer Service Centre to ensure that the problem is properly diagnosed, the product serviced with the correct parts, and to ensure that the product is still under warranty.

  • Page 3

    Programmable Conical Burr Mill CBM-18A...

  • Page 4: Important Safeguards

    Return appliance to the nearest authorized Cuisinart service facility for examination, repair, or mechanical or electrical adjustment. 7. The use of attachments not recommended or sold by Cuisinart may cause fire, electrical shock, or risk of injury. 8. Do not use outdoors.

  • Page 5: Operating Instructions

    machine, you'll always start with the best, most precise ingredients. This grinder is fully automated – just choose your grind setting and number of cups, push Start, and the LCD with countdown timer lets you know how soon you'll have your perfectly ground coffee! OPEraTiNg iNsTruCTiONs 1.

  • Page 6

    1. Hopper Lid 6. Start/Stop Button 2. Bean Hopper 7. LCD Display 3. Conical Burr 8. Manual Button Grinder (not shown) 9. Grind Chamber 4. Grind Selector with Lid 5. Cup Selector 10. Cord Storage...

Comments to this Manuals

Symbols: 0
Latest comments: