Dolmar PS-34 Repair Manual page 23

10 Piston / cylinder
1
2
10-01 Dismantling the driving mechanism
Remove carburetor clip (1) and check
pulse wire. for assembly, click the holding
clip (2) into place in the motor housing.
10-01 Dismantling the driving mechanism
Remove carburetor clip (1) and check pulse
wire (4).
6
5
10-01 Dismantling the driving mechanism
The driving mechanism consists of the
cylinder (5), piston (6), crankshaft (7) and
the crank case lower part (8).
1
4
8
7
3
10-01 Dismantling the driving mechanism
The white insert ring (3) is positioned loose
in the carburetor clip. Make sure that it
does not get lost.
To prevent damage during mounting, the pulse
wire (4) in the connecting muff should be lightly
greased before assembly.
For greasing, please use oil or DOLMAR sili-
cone paste, order no. 980.007.100.
Note: If you use silicone paste, make sure that
the pulse opening (3) is not blocked.
9
10-01 Dismantling the driving mechanism
The piston bolt is fixed by 2 snap rings (9).
To dismantle, remove one snap ring and
push out piston bolt.
Page 23