Table of Contents
Advertisement
The following functions are supported by the ViconNet system through a workstation, recorder or server.
1. System macros can be configured to view and record the camera's video. In addition, within macros,
alarms can be sent and remote macros triggered.
2. An alarm can be triggered upon video motion detection and video loss. This alarm can be sent remotely
to other networked units.
Refer to the ViconNet workstation manual XX113-3X for complete information on operation. A copy
of the manual can be found on the CD included.
ViconNet (IP/LAN) Version Operation
XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera
23
Advertisement
Table of Contents
