Table of Contents
Advertisement
With BLC function, the face displays clearly.
-
In the WDR Menu: Select BLC and press AP key.
-
In the screen that follows, select "Level" and "Area" (Right, Left, Top, Bottom).
LENS
WDR
DAY/NIGHT
AWB
SPECIAL
EXIT
Use ▲ ▼ ◀ ▶ , AP to select
The WDR function can be set to OFF.
Day/Night
Color
In this mode, video output is always color, regardless of illumination.
-
In Day/Night Menu: Select Color and press AP key. In the following screen, select Shutter (speed),
-
AGC (Level) and Flickerless (ON/OFF). Shutter and Flickerless settings are available in Lens DC
mode only. Otherwise the display as N.A.
When Manual mode is selected in Lens Menu, set up of Shutter and Flickerless is not available.
LENS
WDR
DAY/NIGHT
AWB
SPECIAL
EXIT
Use ▲ ▼ ◀ ▶ , AP to select
-
Shutter mode: Supports 9 levels between 1/100 sec ~ 1/50,000 sec.
-
AGC mode: Automatic Gain can be setup as High/Low/Off using Pan Left/Right. In a dark
environment, when AGC gain is set to high, the image becomes brighter.
Flickerless mode: When ON, shutter speed is fixed at 1/100 sec.
-
11
MANUAL4
BLC
COLOR4
ATW1
4
QUIT
MANUAL4
OFF
COLOR4
ATW1
4
QUIT
XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera
(WDR)
LEVEL
AREA
(COLOR)
SHUTTER
N.A.
AGC
HIGH
FLICKERLESS
N.A.
3
RIGHT
Advertisement
Table of Contents
