Table of Contents
Advertisement
Category
Calibration
(1)
Make sure that the Scale is turned OFF.
(2)
Press and hold the OFF button ,and then click the ON button
3
times.
(3)
Release the ON button and OFF button simultaneously.
The screen will show ［
(4)
Then the screen will show ［A－о］, A is the specification
(5)
Code. Please refer to P6 for details .Now for example of 1kg/
(6)
The screen will show［о－1－］ in the stable situation
(7)
Place a 500g weight(1/2capacity) on the mechanism's platform
(8)
The screen will show［о－2－］ in the stable situation
(9)
Place a 500g weight(1/2capacity) on the mechanism's platform again
The screen will show ［
(10)
(11)
Immediately ,the screen will show［
(12)
Remove the weight , the screen will show［－1000g］.
(13)
Push the ON button , the screen will show［ 0g］,You can
take measurement.
<Notice>
(1)
Notice the environment .You'll get incorrect figures as a result of vibration,
Wind ,or the improper temperature.
(2)
Notice the accuracy
(3)
If the scale display is in conflict with the specification chart ,please return
to the manufacturer.
KD200
Service Manual
8888
］for 0.5 seconds.
8888
］ for 1.5 seconds
of the weight for Calibration.
page
0g］, Calibration finished.
Page 5/10
Display
8888
о－0－
0~500g 1g 500~1000g 2g.
о－1—
о－2－
8888
0g
－1000g
0g
Hide quick links:
Advertisement
Table of Contents
