Front Wheel Mount
Lubricate with a grease gun, one zerk for each wheel
mount.
Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.
Front Wheel Bearings
Lubricate with a grease gun, one zerk for each set of
wheel bearings.
Use only good quality bearing grease.
Deck Spindle
Lower the cutting deck completely.
If a grease gun without a rubber hose is used, the foot
plate must be removed.
Lubricate with a grease gun, one zerk, 2-3 strokes.
Use only good quality bearing grease.
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into contact
with belts or belt pulley drive surfaces.
Deck Outer Spindle
Lubricate using a grease gun, one zerk, each side
2-3 strokes. Use only good quality bearing grease.
Engine
Refer to the engine manufacturer's manual for
maintenance and service instructions.
44
LUBRICATION
Lubricating the wheel bearings
Deck spindle
Deck outer spindle (with belt shield removed)
8050-009
8011-732
8061-025