Removal Procedure Of Outdoor Unit; Remove Big Handle,Valve Cover And Top Cover - Gree GWH18QD-K3DNA1G Service Manual

11.2 Removal Procedure of Outdoor Unit

Step

1. Remove big handle,valve cover and top cover

a
Remove the screw connecting the big handle
and right side plate, and then remove the big
handle.
Remove the screw connecting the valve cover
and right side plate, and then remove the valve
cover.
b
Remove the screws connecting the top cover
with outer case, right side plate and left side
plate; lift the top cover upwards to remove it.
94
Warning: Be sure to wait for a minimum of 20 minutes after
turning off all power supplies and discharge the refrigerant
completely before removal.
Procedure
right side plate
screws
top cover
Service Manual
handle
screws
valve cover
screws
Installation and Maintenance