9
C. Activating & Deactivating Ether Link ports
Ether Link ports that have been detected as existing on the
network are not initially activated for your PC.To access an Ether-
Serial port it must be activated.You may wish to activate on a given
computer some, all, or none of the Ether Link ports that are
available on the network.To activate a particular port, right click on
the port where it is displayed in the right panel of the
Manager
, and select "Activate".To activate all ports on a particular
Ether-Serial Link device, right click on that device in the left panel of
the
Manager
Before activation, Ether Link ports only appear under the "My Ether
Link Network" branch of the Ether Link Desktop. Once they have
been activated for a local system, they will also appear under "My
Computer" in the
To deactivate ports
individually, right-
click on the port
where it is displayed
in the right panel of
the
Ether Link
Manager
, and select
"Deactivate".To
deactivate all ports on a particular Ether-Serial Link device, right
click on that device in the left panel of the
"Remove All" .
and select "Activate All" .
Ether Link Manager
.
Manager
Ether Link
and select
Need help?
Do you have a question about the Ether-Serial Link and is the answer not in the manual?