Sony MEX-R5 Operating Instructions Manual page 36

The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
SET (Setup)
CLOCK-ADJ (Clock Adjust) (page 8)
BEEP
To set "ON" ( ) or "OFF."
z
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "NORM" ( ): to use the rotary commander in
z
the factory-set position.
– "REV": when you mount the rotary
commander on the right side of the steering
column.
AUX-A*
1 (AUX Audio)
To turn the AUX source display "ON" (
"OFF" (page 38).
WL* 1 (Wireless)
– "CH1" ( ), "CH2," "CH3," "CH4": to avoid
z
interference with the wireless transmission.
– "OFF": to turn off the wireless transmission.
DSPL (Display)
CLOCK (Clock Information)
To display the clock and the display items at the
same time.
– "ON": to display at the same time.
– "OFF" ( ): to not display at the same time.
z
DIM (Dimmer)
To change the brightness of the display.
– "AT" ( ): to dim the display automatically
z
when you turn the lights on.*
– "ON": to dim the display.
– "OFF": to deactivate the dimmer.
CONTRAST
To adjust the contrast of the main unit display.
The contrast level is adjustable in 7 steps.
M.DSPL*
3 (Motion Display)
To select the Motion Display mode.
– "SA" ( ): to show moving patterns and
z
spectrum analyzer.
– "ON": to show moving patterns.
– "OFF": to deactivate the Motion Display.
DEMO* 1
(Demonstration)
To set "ON" ( ) or "OFF" (page 8).
z
A.SCRL (Auto Scroll)
To scroll long displayed items automatically
when the disc/album is changed.
– "ON": to scroll.
– "OFF" ( ): to not scroll.
z
36
P/M (Play Mode)
LOCAL (Local seek mode)
– "ON": to only tune into stations with stronger
– "OFF" (
MONO (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "ON": to hear stereo broadcasts in monaural.
– "OFF" (
IF
– "AUTO" (
– "WIDE"*
SND (Sound)
) or
z
EQ7 TUNE (page 34)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: "OFF" (
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency:
"OFF" (
LOUD (Loudness)
To enhance bass and treble at lower volume.
– "ON": to reinforce bass and treble.
– "OFF" (
DVD LVL*
To set the audio output level according to the
recorded DVD audio format.
AUX LVL*
2
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources.
EDIT
NAMEEDIT (page 35)
NAME DEL (page 35)
BTM (page 33)
*1 When the unit is turned off.
*2 When the illumination control lead is connected.
*3 When the unit is turned on.
*4 In such cases, some FM stereo broadcasts may
*5 When a disc is played back.
*6 When auxiliary equipment is connected and
signals.
): to tune normal reception.
z
): to hear stereo broadcast in stereo.
z
): to narrow automatically the
z
reception frequency to eliminate noise.
4 : to always hear FM stereo
broadcasts in stereo and with full the
frequency signal reception.
), "78HZ" or "125HZ."
z
), "125HZ" or "78HZ."
z
): to not reinforce bass and treble.
z
5
(DVD level) (page 23)
6 (Auxiliary level)
become monaural while in the stereo reception
mode.
played.