Elo Touch Solutions ET3202L User Manual page 17

When selected, the OSD will not popup when the Menu button is pressed.
OSD Lock
If the OSD needs to be unlocked, press and hold the Menu button for five (5)
seconds. This will cause the monitor to unlock the OSD menu.
When enabled, the monitor will remain ON even if the power button is pressed.
Power Lock
If this feature is enabled and power to the monitor is lost, when power is regained,
pressing the power button will turn on the monitor.
Displays the touchmonitor model and the monitor and touchscreen serial #
Monitor
information
Information
Displays the real-time temperature of the Video Board
System
Note: CPU Sensor temperature is only available if the feature is supported by the
Temperature
computer module.
Display information regarding Elo Touch Solutions contact information.
Help & Support
When power to the monitor is lost and regained, the behavior that is chosen will be
executed.
Always On
Power Behavior
Always Off
Last State
Default: Last State
See page 19 for details
RTC Settings
Moves the image horizontally on the display in single-pixel increments.
Default: centered.
H-position
Not applicable when using HDMI/DisplayPort video or the Computer Module.
Moves the image vertically on the display in single-pixel increments.
Default: centered.
V-position
Not applicable when using HDMI/DisplayPort video or the Computer Module.
Allows fine adjustments of the panels pixel dot clock.
Clock
Not applicable when using HDMI/DisplayPort video or the Computer Module.
Allows fine adjustments of the panels pixel dot clock phase.
Phase
Not applicable when using HDMI/DisplayPort video or the Computer Module.
All touchmonitor adjustments made through the OSD are automatically memorized as soon as
they are entered. This feature saves you from having to reset your choices every time the
touchmonitor is unplugged or powered off and on or if there is a power failure.
User Manual: Interactive Digital Signage
SW602296 Rev A, Page 17 of 39