2.3.5
USB Connectors
At the rear of DS-370 are two USB interface connectors (one USB 2.0 and one USB
3.0) that offer complete plug-and-play and hot-swapping capabilities for up to 127
external devices.
The USB 2.0 interface is compliant with USB UHCI, Revision. 2.0. (Refer to Table 2.1
for pin definitions.)
The USB 3.0 interface is compliant with USB UHCI, Revision 3.0. (Refer to Table 2.7
for pin definitions.)
Table 2.7: USB 3.0 Connector Pin Assignments
Pin
1
2
3
4
5
6
7
8
9
DS-370 User Manual
Figure 2.13 USB 3.0 connector
Signal Name
VBUS
USB Data-
USB Data+
GND
StdA_SSRX-
StdA_SSRX+
GND_DRAIN
StdA_SSTX-
StdA_SSTX+
12