Back Panel - Belkin AC 1600 DB User Manual

GETTING TO KNOW YOUR ROUTER

Back Panel

B
A
C
D
E
A) Modem (WAN) Connector
Connect your modem to this
port using an Ethernet cable .
B) Wired (LAN) Connectors
Connect computers and other
wired network devices to these
ports using Ethernet cables .
C) USB Port
USB printers, disks, and other
USB devices plugged into this
port will be shared on your
network . Each USB port has a
light that indicates its status .
Off: No USB device is connected or
the attached USB device is not in use .
Blinking: Please wait to unplug the
device until the light turns off .
On: The USB device is connected
and being shared on your network .
34
D) Reset Button
This button is used to restart your
Router in rare cases when it functions
incorrectly . Resetting the Router will
preserve your settings . This button
may also be used to restore the
factory default settings . Please see
the Troubleshooting section for more
information .
E) Power Connector
Connect the included power supply
to this jack .