MV Agusta Brutale 675 User Manual page 103

High beam flasher button
It is used to attract the attention of other road users in case of danger. When the high beam is on, the
function is inactive.
Low/high beam button
Under normal conditions, the low beam is on. The high beam can be switched on by pressing the but-
ton when allowed by the traffic and road conditions.
3
Turn indicator switch
It is used to show the rider's intention to change direction or lane.
WARNING
Failure to switch the turn indicators on or off at the right time may cause an accident in that
the other road users may draw incorrect conclusions about the direction of motion of the
vehicle. Always switch on the indicators before turning or changing lanes. Then be sure to
switch off the indicators after completing the operation.
Horn button
It is used to attract the attention of other road users in case of danger.
Clutch lever
It engages/disengages the clutch through a hydraulically controlled device.
CONTROLS AND INSTRUMENTS
- 18 -
3