Advertisement
5. Card Sales and Refunds
Once your terminal has been set-up, successfully confi gured and has a GPRS
signal, you can start to accept and process card payment transactions.
Most credit and debit cards issued in the UK and Ireland will be Chip and PIN
(Personal Identifi cation Number) type cards. For security reasons, the cardholder
will need to confi rm the transaction by typing their PIN into the terminal.
For further information on how to process a Chip and PIN card transaction
please refer to Section 15, (page 13) of the iWL200 Series Terminal User
Guide this can be found in the Merchant Zone at
www.transaxmerchantservices.co.uk
The iWL200 Series Terminal User Guide also provides information on how to
process other types of card transaction.
6. End of Day Procedure (essential)
The End of Day procedure should be done at the end of every working day to
ensure that your card transaction data is captured and that you will be paid
('settlement') for the transactions.
Step
1
GPRS
DD/MM/YYYY
DD/MM/YYYY
DD/MM/YYYY
1
READY
Merchant Number:
XXXXXXXX
Step
2
TOTALS MENU
End-of-Day Banking
Z - Totals
X - Totals
TMS, iWL251 (GPRS), Read Me First Installation Instructions, 1215 v2
From the Ready Screen, press the MENU key
twice and select Totals by pressing the green
GPRS
O2-UK
HH:MM:SS
HH:MM:SS
HH:MM:SS
ENTER key.
Note: You may need to scroll through the
menu options by using the f2 and f3 keys
before selecting Totals.
Select End-of-Day Banking using the green
ENTER key.
You may be required to swipe a Supervisor
Card. If prompted to do so, swipe the card
through the magnetic card reader on the right
hand side of the terminal.
Continued Overleaf
Hide quick links:
Advertisement
