Step 4: Presetting Radio Stations - Sony MHC-VX88 Operating Instructions Manual

Step 3: Setting the time
(continued)
3
Press ENTER.
The minute indication flashes.
4
Press . or > repeatedly to set
the minute.
5
Press ENTER.
The clock starts working.
Tip
If you've made a mistake, start over from step 1.
To change the time
The previous explanation shows you how to set the
time while the power is off. To change the time
while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Press . or > repeatedly to select
SET CLOCK.
3 Press ENTER.
4 Perform steps 2 through 5 above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
10
Step 4: Presetting
radio stations
You can preset 20 stations for FM and 10
stations for AM.
?/1
(Power)
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
FM y AM
1 3
2 4 SHUTTLE