Table of Contents
Advertisement
1.3 Cleaning and Maintenance
1.3 Cleaning and Maintenance
Please make sure that safety-
skilled person once a year.
1. Make sure before installing that all screws are tightly connected and not corroded.
Make sure before installing that all screws are tightly connected and not corroded.
Make sure before installing that all screws are tightly connected and not corroded.
2. There must be no deformations on the housings, f
There must be no deformations on the housings, fixations and installations spots.
3. No damages must be showed on the power supply cables, material fatigue and
No damages must be showed on the power supply cables, material fatigue and
No damages must be showed on the power supply cables, material fatigue and
sediments.
If the device is going to be cleaned, please use moist, lint free cloths. Never use alcohol or
If the device is going to be cleaned, please use moist, lint free cloths. Never use alcohol or
If the device is going to be cleaned, please use moist, lint free cloths. Never use alcohol or
solvents!!
The cooling fan must be cleaned monthly!
To clean the interior of the device please use a vacuum cleaner or an air jet.
To clean the interior of the device please use a vacuum cleaner or an air jet.
To clean the interior of the device please use a vacuum cleaner or an air jet.
We recommend cleaning the lenses weekly to keep the light output as long as possible.
We recommend cleaning the lenses weekly to keep the light output as long as possible.
We recommend cleaning the lenses weekly to keep the light output as long as possible.
2. DMX Mode
You are able to work with the fixtures in
You are able to work with the fixtures in 3 different modes
DMX Mode – in this Mode its possible to control via DMX Controller .
in this Mode its possible to control via DMX Controller .
Program Mode – in thsi mode you can use the built in pro
in thsi mode you can use the built in programs
Speed Mode – in this mode you can a
in this mode you can adjust the program speed.
Sound Mode – in this mode the
in this mode the fixture reacts to sound impulse.
3. Set Up
3.1. DMX ADD.
Defines the DMX start address
Defines the DMX start address
3.2. Manual Dimmer
Manuel dimming 0-100%
This setting overwrites every
This setting overwrites every other setting like the max output in manuel or DMX mode and the
built in programs.
-relating and machine-technical installations are inspected by a
ned monthly!
5 / 11
S T U D I O P A R Z O O M
T U D I O P A R Z O O M
technical installations are inspected by a
ixations and installations spots.
ut in manuel or DMX mode and the
Advertisement
Table of Contents
