Install The Mainboard - SOYO SY-6BA+ Quick Start Manual

SY-6BA+ Quick Start Guide

Install the Mainboard

Follow the steps below in order to perform the installation of your new SY-6BA+ Mainboard.
Step 1. Install the CPU
Mark your CPU Frequency:
that should be clearly marked on the CPU cover.
233MHz (66 x 3.5)
266MHz (66 x 4.0)
550MHz (100 x 5.5)
CPU Mount Procedure:
purchased separately, follow these instructions.
1 Unpack the Retention Kit
Supporting Base
Support Clip
Latches (x2)
Screws (x2)
Retention Clip
5 Install the Retention Clip
7 Install the Support Clip
Record the working frequency of your CPU
300MHz (66 x 4.5)
333MHz (66 x 5.0)
To mount the Pentium
2 Position the Mainboard
ATX Power
CPUFAN Power
6
8 Insert the Latches
6
350MHz (100 x 3.5)
400MHz (100 x 4.0)
®
II processor that you have
3 Insert the Screws
4 Install the Supporting Base
Slot 1
Heat Sink
Install the CPU
9
Remember to connect the CPU
Cooling Fan to the CPUFAN
power connector on the
mainboard.
450MHz (100 x 4.5)
500MHz (100 x 5.0)
Larger Pinhole