Install The Lights And Lens; Attach The Emergency Release Rope And Handle - Craftsman 139.53927 Owner's Manual

Hide thumbs Also See for 139.53927:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION STEP 10

Install the Lights and Lens

• Install a 100 watt maximum light bulb in each
socket. The lights will turn ON and remain lit for
approximately 4-1/2 minutes when power is
connected. Then the lights will turn OFF.
• Insert bottom lens tabs into slots on chassis. Tilt
towards chassis to engage top tabs, then drop
down gently into place. (See illustration.)
• To remove, depress both top lens tabs. Tilt lens
slightly outward and down, then pull out to clear
bulbs. Use care to avoid snapping off bottom lens
tabs.
NOTE: Use only standard light bulbs. The use of
short neck or speciality light bulbs may overheat the
endpanel or light socket.
INSTALLATION STEP 11
Attach the Emergency Release
Rope and Handle
• Thread one end of the rope through the hole in the
top of the red handle so "NOTICE" reads right side
up as shown. Secure with an overhand knot at
least 1" (2.5 cm) from the end of the rope to
prevent slipping.
• Thread the other end of the rope through the hole
in the release arm of the outer trolley.
• Adjust rope length so the handle is 6 feet (1.8 m)
above the floor. Secure with an overhand knot.
NOTE: If it is necessary to cut the rope, heat seal
the cut end with a match or lighter to prevent
unraveling.
Top
Chassis
Slot
Bottom
Chassis Slots
• To prevent possible SERIOUS INJURY or DEATH from
a falling garage door:
– If possible, use emergency release handle to
disengage trolley ONLY when garage door is
CLOSED. Weak or broken springs or unbalanced
door could result in an open door falling rapidly
and/or unexpectedly.
– NEVER use emergency release handle unless garage
doorway is clear of persons and obstructions.
• NEVER use handle to pull door open or closed. If rope
AVERTISSEMENT
knot becomes untied, you could fall.
ATTENTION
Trolley
Release Arm
Emergency
Release Handle
23
Top Lens Tab
Bottom
Lens Tab
Top
Chassis Slot
Lens
Bottom
Insert Bottom
Chassis Slot
Lens Tabs First
WARNING
CAUTION
Overhand
Knot
Lens
Top
Lens Tab

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents