Firmware Upgrading & Diagnostic Software - Philips DVDR7250H05 Service Manual
Hdd & dvd recorder
Hide thumbs
Also See for DVDR7250H05:
- User manual (102 pages) ,
- Service manual (18 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
3.
Firmware Upgrading & Diagnostic Software
3.1
Firmware Upgrading
A. Preparation to upgrade firmware:
1.
Unzip the zip-archive file
2.
Start the CD Burning software and create a new CD project (data disc) with the following settings:
File system
Format
Recording mode
Note: Long file name is necessary for the preparation of the upgrade disc
3.
Place the content of the zip-archive into the root directory of the new CD project.
4.
Burn the data onto a blank CDR or CD-RW
B. Procedure to apply the firmware upgrade:
1.
Hold the <Record> + <Open/Close> buttons down and Power up the set.
2.
The tray opens and set will display:
FORCE DL −>.... INSERT DISC
3.
Insert the prepared Upgrade CDROM and close the tray.
4.
The set will display:
INIT DSC −> .......... SYS VER −> READ FILES .... DOWNLOAD BE
The whole process takes less than 15 minutes
Note: Do not press any buttons or interrupt the mains supply during the upgrading process, otherwise the set may becomes
defective.
5.
When the upgrade is completed the tray will open automatically and the set will display:
REMOVE DISC
6.
Close the tray and the set will display:
DONE
7
The set will go into Standby mode.
C. How to read out the firmware version to confirm set has been upgraded:
1.
Power up the set.
2.
Press <System> button on the Remote control and select {Setup} option
3.
Press <Right> button to select {System}
4.
The set will prompt you about clearing the Time Shift Buffer
5.
Select {Yes} and press <OK> button
6.
Press <Down> button several times to select {Version info}
7.
Press <OK> button
8.
The TV connected to the set will display:
(C) PHILIPS 2006 VERSION INFORMATION:
DIF05_8/7028 AN SV11226
BE 43.3.7.9 ASP 1,18,1,10FP
DTTM HW:01020102 DTTM
SW:00040206
SIT7250H-FF5F-S28_F604
20060203-1650 pro sxcplusint
EPG:3.06 DPMS:P_DPM
9.
Press <System> button to exit
Jeanne van Woerkom electra
Firmware Upgrading & Diagnostic Software
: Joliet
: MODE 2: CDROM XA
: SINGLE SESSION (TRACK-AT-ONCE), FINALIZED CD
www.freeservicemanuals.info
3139 785 31800
3.
EN 7
Advertisement
Table of Contents
