TOTALINE 1 For All Owner's Manual page 24

About Advanced Features & Operation
HOLIDAY MODE - When the thermostat is programmed for Holiday mode,
it will take effect at 12:00 am of the next day. In order for the Holiday
mode to take effect, the thermostat must be in the Program On mode. The
thermostat will control to the Unoccupied cooling and heating setpoints
(see pages 9 & 10). Holiday setpoints will be enforced for the number of
days specified in the Holiday setup step below (0 - 99 days).
I2:00
72
Mo
occupied
Place the thermostat
in the Program On
MODE
mode.
ProgramOn
Press and hold the
occupied 1
MODE button. While
MODE
holding the MODE
button, press and
hold the UP button for
5 seconds.
Note: You cannot set the Heat setpoint any higher than the Cool setpoint minus
the deadband setting in Advanced Setup step #8 on page 15.
Holiday Display - When the thermostat is placed into the Holiday mode, the
thermostat will display the screen shown below. To return the thermostat
to normal operation from Holiday mode, follow the steps above and adjust
the number of days to zero.
Overriding the Holiday Mode - Pressing the OVERRIDE button during
Holiday Mode will temporarily force the thermostat into Occupied 1
comfort settings for 30 min. The remaining Override time will alternate
with the clock display (see page 13). The Override timer can be set up to
a maximum of four (4:00) hours, in increments of 30 minutes. If the timer
has been set for the maximum time, the next press of the OVERRIDE
button will reset the timer, returning the thermostat to Holiday Mode.
76
Press the OVERRIDE
Pm
button once. Select the
1 C
OOL number of days that the
Holiday schedule will
be in effect. A value of
0 disables Holiday
68
H
EAT
mode.
(0 - 99 days)
After Holiday program-
ming is complete, press
the MODE button once
MODE
to save your changes
and return to normal
operation.
hol
Page 23
hol
0
76
I2:00
72
Pm
Mo
occupied 1 C
OOL
68
H
EAT
ProgramOn