Makita 4324 Instruction Manual page 8

Operation
CAUTION:
Always hold the tool base flush with the workpiece. Failure to do so may cause blade
breakage, resulting in a serious injury.
Turn the
tool
on and wait until the blade
attains full speed. Then rest the tool base
flat on the workpiece and gently move the
tool forward along the previously marked
cutting line. When cutting curves, advance
the tool very slowly.
Bevel cutting
CAUTION:
Always be sure that the tool is switched
off
and unplugged before tilting the tool base.
Raise the dust cover all the way before making bevel cuts.
With the tool base tilted, you can make
bevel cuts at any angle between 0" and
45"
(left or right).
8