Cushman SHUTTLE 2+2 G Owner's Manual page 54

PERIODIC SERVICE SCHEDULE
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
Front Wheel Alignment - Inspect for unusual tire wear.
King Pins - Check for excessive play and tightness of retaining nuts.
Rear Axle - Check for unusual noise and loose/missing mounting hardware.
Air Filter Element - Check filter element; clean/replace as required.
Oil Filter - Replace (at oil change)
Engine Oil - Replace with SAE 10W-30 or 10W-40 that meets or exceeds SF,
SG, CC oil. DO NOT OVERFILL
Drive Belt - Check for cracks, fraying and excessive wear
Direction Selector - Check for wear and smooth movement; lubricate shaft
with light oil if required.
Steering Assembly - Inspect bellows and pinion seal for damage and leakage.
Rack End Ball Joint - Check for noise and loose or missing hardware.
Battery - Clean battery and terminals
Front Wheel Bearings - Check and adjust as required. See Repair and Ser-
vice Manual for procedure.
Rear Axle - Check lubricant level; add lubricant if required.
Brakes - Clean and adjust. See Repair and Service Manual for procedure.
Brakes - Check brake shoe linings. See Repair and Service Manual for proce-
dure.
Fuel Filter - Replace
Spark Plug - Replace and gap new plug.
Muffler/Exhaust - Check mounting hardware. Check for leaks at head and
muffler gaskets.
Valves - Check cold (intake/exhaust). See Repair and Service Manual for pro-
cedure.
Carburetor - Clean
Cylinder Head and Piston - Remove carbon from cylinder head and piston.
Cylinder Head and Piston - Check valve seats for carbon buildup; clean if
required.
*NOTE: Some maintenance items must be serviced more frequently on vehicles used under severe driving conditions.
46
REMARKS
Owner's Guide
C&A C&A C&A
* *
* *
* *
R R
R R
* *
C&A C&A
* *
* *
* *
C&A
*
C&A
*
R
R
*
*
CL
CL
CL