Wells B-50 Supplemental Service Instructions page 5

BUILT-IN ELECTRIC CHARBROILER
IMPORTANT:
B-406 grate mounts above the element.
B-446 and B-506 grates can mount above or below
the elements.
Always remove a top-mounted grate before lifting
the element assembly.
IMPORTANT:
Remember to dis-engage the support rod before
lowering element assembly.
IMPORTANT:
DO NOT pour water over elements to refill drip pan.
ITEM
TEMPERATURE
CONTROL
INDICATOR LIGHT
HEATING ELEMENT
ASSEMBLY
ELEMENT GUARD/
GRATE
ELEMENT
SUPPORT ROD
DRIP PAN
DATA PLATE
WELLSLOKS
FEATURES & OPERATING CONTROLS (continued)
COMMENT
The char-broiler is INFINITE SWITCH CONTROLLED. Power is applied to the
heating elements in a timed sequence based on the control knob position.
Light will glow when the infinite switch is in any position other that OFF.
The char-broiler element assembly may be raised for cleaning, or to add water to
the drip pan. Use the handle to manually lift the grate. It is held the "up" position by
a support rod which automatically engages as the element is raised.
The grate is designed to protect the individual elements from food contact and
spatula abrasion, resulting in prolonged element life and reduced carbonization.
The grate is easily removed for cleaning.
Holds element assembly in up position. Engages automatically when the element
assembly is raised. Must be disengaged manually before lowering elements.
The heavy-duty removable drip pan is located under the element assembly. The
drip pan catches food particles and grease drippings during broiler operation.
Maintain 2 inches of water in the drip pan at all times during operation of the broiler.
The drip pan is easily removed for cleaning.
Gives manufacturer, make, model and serial number. Also voltage and phase
information, and agency approvals.
The broiler is equipped with WELLSLOKS, uniquely designed turnout tabs, which
help secure the broiler to the countertop.
3