Connecting A Headphone - Hisense LHD32D50TUK User Manual

Getting Started
Connecting a PC with VGA cable
1. Use a VGA cable to connect the PC's VGA output jack to the TV's VGA jack. Use
an audio cable to connect the PC's audio output jack to TV's PC AUDIO IN jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
TV JACK
Audio Cable
(not included)
VGA Cable
(not included)
NOTES
Primarily this unit is intended for use as an LCD TV. If you want to use it as a
monitor, please contact the manufacturer of the PC Video/Graphic's card for further
support. Perfect compatibility is not warranted.
The VGA cable will not be supplied with the product.
We strongly recommend to use VGA cable with 2 cores as shown in the figure.
Connecting an Audio Receiver
This product supports the ARC (Audio Return Channel) functions via an HDMI cable.
Note that the ARC function is supported by the HDMI/ARC jack only.
The ARC function enables digital output of sound using the ARC jack and can only
be operated when the TV is connected to an audio receiver that supports the ARC
function.
1. Use a optical cable to connect the audio receiver's OPTICAL input jack to the TV's
OPTICAL output jack.Or use an HDMI cable to connect the audio receiver's audio
input jack to the TV's ARC jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
NOTES
When a digital audio system is connected to the OPTICAL (COAXIAL) jack,
decrease the volume of both the TV and the system.
EXTERNAL DEVICES
Computer
5
Getting Started
Connecting an ethernet cable to access a network or the Internet
Connect an ethernet cable to access a network or the Internet.

Connecting a headphone

Headphones can be connected to the HEADPHONE output on your set. (While the
headphone is connected, the sound from the built-in speakers will be disabled.)
NOTE
To prevent possible hearing damage, do not listen at high volume levels for
long periods
TV JACK
Connect to the devices with SCART interface
It provides a convenient multi-singal connector between the TV set and video
equipment.
Specifications: Scart : CVBS in/out, RGB in
Connecting a Common Access Module
1. Before you insert/remove the Common Access Module,ensure that the TV is
switched off.Then insert the CI card into the Common Access Module in
accordance with the Service Provider's instructions.
2. Insert the Common Acdess Module into the slot.Flip the Common Access
Module to another side and try again if you feel resistance.
3. Switch the TV on.
EXTERNAL DEVICES
6