Whirlpool AKR5200/IX Instruction Manual page 6

Components
Ref Qty
1 1pcs
2 2pcs
3 3pcs
2pcs
4
5 pcs
1
6 pcs
1
pcs
7 1
8 pcs
2
9 2pcs
1pcs
10
11 pcs
2
12 1pcs
13 1PC
Electrical Connection
1. Make sure the power voltage specified on the appliance rating plate is the same as the mains
voltage. This information can be found inside the hood,
2. Before reconnecting the hood circuit to the power supply and checking correct operation,
always make sure the power cable is correctly fitted and that it was NOT crushed in its housing
during installation. Make sure to have this operation carried out by a qualified technician in
accordance with all local codes and standards.
3. Turn off electrical power before installation
4. If supply cord is damages, please call manufacture for replacement to avoid any electrical
hazards
5. Do not use plug and extension cord other than the one provided
6. Earthing of the hood is compulsory. Do not remove ground prong of the plug.
Components
Hood Body
Steel Bolt
Cross self-drill bolt
Steel bolt
Inner chimney
Exhaust
Exterior chimney
Cross discal thread bolt
Cross discal bolt-big head
Fixing frame
Plastic distensible sleeve
Instruction Manual
Warranty Card