Connections; Notes On Connections - Panasonic PT-L780NTE Operating Instructions Manual

Connections

Notes on connections

B Read the instruction manual for each system component carefully before
connecting it.
B Turn off the power supply for all components before making any
connections.
B If the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
B If there is a lot of jitter in the video signal which is input from the video
source, the picture on the screen may flicker. In such cases, it will be
necessary to connect a TBC (time base corrector).
B The projector has built-in speakers. However, you will need to connect a
separate audio system to the AUDIO OUT jack if your needs specify high
sound volumes. No sound will come out of the projector's built-in speakers
while the AUDIO OUT jack is being used.
B It may not be possible to connect some types of computer. Refer to the list
of compatible signals on page 63.
B The pin layout and signal names for the S-VIDEO IN connector are shown
below.
#
&
External view
B The pin layout and signal names for the RGB/YP
connector are shown below.
-
(
#
External view
24-E
NGLISH
Pin No.
$
%
Pin No.
1
,
'
Pin + is spare.
Pins &–*, , and - are for earth.
Pins . and 1 functions are only valid when
supported by the computer
#
Earth (Luminance signal)
$ Earth (Colour signal)
% Luminance signal
& Colour signal
P
B R
# R/P
R
$ G/G·SYNC/Y
% B/P
B
. SDA
/ HD/SYNC
0 VD
1 SCL
Signal
(RGB1 IN/RGB2 IN)
Signal