® life without limit installation instructions urban jungle / terrain ™ ™ Evenflo travel system ™ Installation instructions for the travel system that fits the Discovery infant carseat made by Evenflo ™ ™ WARNINGS Check you have the correct travel system for your carseat.
Page 2
IMPORTANT CHECKS • Make sure baby is harnessed into carseat using the manufacturer’s instructions. • When fitting carseat onto travel system, ALWAYS keep a steady hand on carseat and baby. • Check travel system is engaged correctly onto buggy frame and cannot move in any direction. (Refer back to installation instruc tions to ensure positioning of snap locks are correct). • Do not use travel system if you are unable to secure carseat or travel system. In this case, contact your store / distributor where the buggy was purchased from, for more help. • It is recommended that you practise the following instructions without baby in carseat. WARNING!: ALWAYS put the buggy brake on.
Page 3
4. Close both snap locks down flat, making 3. Open up snap locks and press travel sure you hear the lock ‘click’ indicating system onto frame so that top snap locks they are fully locked. are directly above sunhood lugs (on both sides). 6. Buckle straps across top of carseat and 5. Pass straps around frame, below sunhood lugs and through the slots on each side of tighten by pulling on free end of strap.
Page 4
For any assistance, please contact your nearest retailer listed at www.mountainbuggy.com Model MB1-CLIP2 Issue June 2010 Safety certified: AS/NZS 2088:2000 mountain buggy ® life without limit send 1 02-112 Daniell St, Newtown 6021, Wellington, New Zealand +64 4 380 0833 fax +64 4 380 0137 Designed in New Zealand. Made in China. evenflo_eng_28-07-10.indd 4 29/07/2010 12:48:55 p.m.
Need help?
Do you have a question about the urban jungle and is the answer not in the manual?
Questions and answers