Print Settings - Panasonic Lumix DMC-FS5 Operating Instructions Manual

Connecting to other equipment
3
Press 3 to select [PRINT START] and then press
[MENU/SET].
•
Refer to P88 for the items which can be set before starting to print
the pictures.
•
Press [MENU/SET] to cancel printing.
•
Disconnect the USB connection cable after printing.
Select and set the items both on the screen in step
"Selecting a single picture and printing it" and in step
"Selecting multiple pictures and printing them" procedures.
•
When you want to print pictures in a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [{]
and then set the paper size or the layout on the printer. (For details,
refer to the operating instructions of the printer.)
•
When [DPOF PICTURE] has been selected, the [PRINT WITH DATE]
and [NUM. OF PRINTS] items are not displayed.
Item
[OFF]
[ON]
•
If the printer does not support date printing, the date cannot be printed on the picture.
•
Since the printer's settings may take precedence over the print with date setting, check the
printer's print with date setting as well.
Note
When asking the photo shop to print the pictures
By stamping the date using [TEXT STAMP] (P74) or setting date printing at the time of the [DPOF PRINT]
•
(P80) setting before going to a photo shop, the dates can be printed at the photo shop.
You can set the number of prints up to 999.
88
VQT1N09
[PRINT WITH DATE]
Date is not printed.
Date is printed.
[NUM. OF PRINTS]

Print Settings

Description of settings
MULTI SELECT
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL
2
of the
MULTI SELECT
3
of the
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL
OFF
1
MENU
SELECT SET
OFF
1
MENU
SELECT EXIT