Setting Date/Time (Clock Set) - Panasonic Lumix DMC-FS5 Operating Instructions Manual

Table of Contents

Advertisement

Preparation
Type of card
SD Memory Card (8 MB to 2 GB)
(Formatted using the FAT12 or FAT16
format in compliance with the SD
standard)
SDHC Memory Card (4 GB, 8 GB,
¢
16 GB)
(Formatted using the FAT32 format in
compliance with the SD standard)
MultiMediaCard
¢ The SDHC Memory Card is a memory card standard decided by the SD Association in 2006
for high capacity memory cards more than 2 GB.
¢ You can use an SDHC Memory Card in equipment that is compatible with SDHC Memory
Cards however you cannot use an SDHC Memory Card in equipment that is only compatible
with SD Memory Cards. (Always read the operating instructions for the equipment being
used.)
You can only use cards with SDHC logo (indicating compliance with the SD standard) if using
cards with 4 GB or more capacity.
Please confirm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs
(This Site is English only.)
Note
Do not turn this unit off, remove its battery or card or disconnect the AC adaptor
(DMW-AC5E; optional) when the access indication is lit [when pictures are being read or
deleted or the built-in memory or the card is being formatted (P25)]. Furthermore, do not
subject the camera to vibration or impact. The card or the data on the card may be
damaged, and this unit may no longer operate normally.
The data on the built-in memory or the card may be damaged or lost due to electromagnetic
waves, static electricity or breakdown of the camera or the card. We recommend storing
important data on a PC etc.
Do not format the card on your PC or other equipment. Format it on the camera only to ensure
proper operation. (P25)
Keep the Memory Card out of reach of children to prevent swallowing.

Setting Date/Time (Clock Set)

We recommend selecting [LANGUAGE] (P25) from the [SETUP] menu (P21) before
setting date/time.
The clock is not set when the camera is shipped.
1
Turn the camera on.
The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A [MENU/SET] button
B Cursor buttons
16
VQT1N09
Characteristics
Fast recording and writing speed
Write-Protect switch
this switch is set to the [LOCK] position,
no further data writing, deletion or
formatting is possible. The ability to
write, delete and format data is restored
when the switch is returned to its
original position.)
Still pictures only.
A
provided (When
OFF
B
A
2
ON
A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-fs3

Table of Contents