Preparation; Charging The Battery - Panasonic Lumix DMC-FS5 Operating Instructions Manual

Table of Contents

Advertisement

Preparation

Preparation

Charging the Battery

Use the dedicated charger and battery.
The battery is not charged when the camera is shipped. Charge the battery before use.
Charge the battery with the charger indoors.
Charge the battery in a temperature between 10 oC to 35 oC. (The battery temperature should
also be the same.)
1
Attach the battery with
attention to the direction of the
battery.
2
Connect the AC mains lead.
The AC mains lead does not fit entirely
into the AC input terminal. A gap will
remain as shown below.
Charging starts when the [CHARGE]
indicator A lights green.
Charging is complete when the
[CHARGE] indicator A turns off (after
approx. 120 min maximum).
3
Detach the battery after
charging is completed.
∫ When the [CHARGE] indicator flashes
The battery temperature is excessively high or low. The charging time will be longer than
normal. Also, charging may not be completed.
The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
Note
After charging is completed, be sure to disconnect the power supply device from the electrical
outlet.
The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
The battery will be exhausted if left for a long period of time after being charged.
The battery can be recharged even when it still has some charge left, but it is not
recommended that the battery charge be frequently topped up while the battery is fully
12
VQT1N09

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-fs3

Table of Contents