Control Equipment; Instrument Panel (Optional) - Yanmar 2YM15 Operation Manual

PRODUCT OVERVIEW

CONTROL EQUIPMENT

The control equipment at the helm makes remote control operation possible. It consists of
the instrument panel, which is connected to the engine by a wire harness, and the remote
control handle, which is connected by control cables to the engine control lever and marine
gear.

Instrument Panel (Optional)

Equipment and Functions
The instrument panel is located at the helm. The following instruments enable you to start or
stop the engine and to monitor its condition during operation. A typical instrument panel is
shown in Figure 9.
(1)
(2)
1 – Tachometer
2 – Hourmeter
3 – Moisture Cap for Key Switch
4 – Key Switch
5 – Stop Button
Gauges
B-Type panels use analog electric gauges with needle indicators.
Instrument
Tachometer
Hourmeter
Instrument Panel Lights
16
B-Type
Figure 9
6 – Battery Low Charge Indicator
7 – Water in Sail Drive Seal Indicator
8 – Engine Oil Low Pressure Indicator
9 – Coolant High Temperature Indicator
Function
Shows the engine rotation speed.
Shows the number of operating hours; can be used as a guide
for periodic maintenance checks. The hourmeter is located at
the bottom of the tachometer.
When turning the key switch to ON, the gauges will illuminate for
easier viewing.
YM Series Operation Manual
© 2007 Yanmar Marine International
(9)
(8)
(7)
(6)
(5)
(4)
(3)
0004486