Toyota 2013 Camry Hybrid Manual page 448

Hide thumbs Also See for 2013 Camry Hybrid:
Table of Contents

Advertisement

5-2. Steps to take in an emergency
If the vehicle's 12-volt battery is discharged
The following procedures may be used to start the hybrid system if
the vehicle's 12-volt battery is discharged.
You can also call your Toyota dealer or qualified repair shop.
If you have a set of jumper (or booster) cables and a second vehi-
cle with a 12-volt battery, you can jump start your vehicle by follow-
ing the steps below.
Open the trunk lid and remove the 12-volt battery cover.
STEP
1
(→P. 373)
STEP
2
Connect the jumper cables according to the following procedure:
Connect a positive jumper cable clamp to the exclusive jump
starting terminal on your vehicle
Connect a positive jumper cable clamp to the positive (+) battery
terminal on the second vehicle
Connect a negative cable clamp to the negative (-) battery termi-
nal on the second vehicle
Connect the jumper cable to ground on your vehicle as shown in
the illustration.
5
471

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents