Toyota 2013 Camry Hybrid Manual page 434

STEP 6
Installing the spare tire
STEP 1
Install the tire and loosely tighten each wheel nut by hand by
STEP 2
approximately the same amount.
Tapered portion
Disc wheel
seat
5-2. Steps to take in an emergency
Remove all the wheel nuts and
the tire.
When resting the tire on the
ground, place the tire so that the
wheel design faces up to avoid
scratching the wheel surface.
Remove any dirt or foreign mat-
ter from the wheel contact sur-
face.
If foreign matter is on the wheel
contact surface, the wheel nuts
may loosen while the vehicle is
in motion, causing the tire to
come off.
When replacing a steel wheel
with a steel wheel, tighten the
wheel nuts until the tapered por-
tion comes into loose contact
with the disc wheel seat.
5
457