5-2. Steps to take in an emergency
Stopping the hybrid system
■
Shift the shift lever to P and press the "POWER" switch as you normally do
when stopping the hybrid system.
Replacing the key battery
■
As the above procedure is a temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery is depleted.
(→P. 392)
Changing "POWER" switch modes
■
Release the brake pedal and press the "POWER" switch in
The hybrid system does not start and modes will be changed each time the
switch is pressed. (→P. 163)
If the doors cannot be locked or unlocked by the smart key system
■
Lock and unlock the doors by the mechanical key or wireless remote control.
When the electronic key does not work properly
■
Make sure that the smart key system has not been deactivated in the
●
customization setting. If it is off, turn the function on.
(Customizable features →P. 510)
Check if battery-saving mode is set. If it is set, cancel the function.
●
(→P. 61)
470
STEP
3
above.