Engine run-in speed
max 5000 min
-1
(for the first
621 miles (1000 km))
Have the first inspection carried
out after 300 - 750 mls (500 -
1,200 km).
Brake pads
New brake pads must be run in
before they achieve their opti-
mum friction force. This initial
reduction in braking efficiency
can be compensated for by ex-
erting greater pressure on the
brake levers.
New brake pads can extend
stopping distance by a sig-
nificant margin.
Brake early.
Tires
New tires have a smooth sur-
face. This must be roughened by
riding in a restrained manner at
various heel angles until the tires
are run in. This running in proce-
dure is essential if the tires are to
achieve maximum grip.
New tires do not provide
full tire traction. Accident
hazards exist in particular on wet
roads and at extreme angles.
Always think well ahead and
avoid extreme angles.
Speed
Engine speed warning
The engine rpm warning 1 alerts
the rider that the red overspeed
range 2 has been reached. The
signal is maintained until the
transmission is upshifted or the
engine speed is reduced.
Offroad riding
After driving offroad
BMW Motorrad recommends
that the following be observed
after driving offroad:
5
47
z