BMW 2012 G 650 GS Sertao Rider's Manual page 47

warning light flashing. You should
wait for this procedure to be
completed to avoid problems
during driving.
Engage neutral, or pull back
clutch lever if a gear is en-
gaged.
You cannot start the mo-
torcycle with the side stand
extended and a gear engaged.
The engine will switch itself off if
it is started with the transmission
in neutral and then a gear is en-
gaged before retracting the side
stand.
For cold starts and at low
ambient temperatures: pull the
lever to disengage the clutch
and twist the throttle grip
slightly.
Press starter button 2.
If the engine fails to start
although the starter turns,
insufficient battery voltage may
be the reason. Recharge the bat-
tery before you start the engine,
or use jump leads and a donor
battery to start.
Engine starts.
Consult the troubleshooting
chart if the engine refuses to
start. ( 100)
Pre-ride check
After the ignition is switched on,
the instrument cluster conducts a
test of the warning and indicator
lights and the display, the so-
called "Pre-Ride-Check".
Phase 1
The indicator and warning lights
and all segments of the multi-
function display are switched on.
Phase 2
The pointer of the speedometer
is moved back to the end stop
again.
Phase 3
All lamps and segments are
switched off.
The instrument cluster switches
into normal operation.
5
45
z