BMW 2012 G 650 GS Sertao Rider's Manual page 87

bulb's glass surface, always use
a clean, dry cloth to hold it.
Install bulb 2 by screwing
clockwise into light housing.
Insert inside end of lens into
light housing and close.
Install screw 1.
Replacing tail light and
brake light bulb
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove two screws 1 and
take off tail light lens.
Press bulb 2 into socket and
turn counterclockwise to re-
move.
8
85
z