Updating Your Tv Via Usb - Sharp AQUOS LC-32LE700S Operation Manual

Appendix

Updating your TV via USB

Setup
Software update
This function allows you to update to the latest software
using a USB device. You must update the software
through the USB terminal.
• To check the software version for the TV, use the URL shown
on the back cover.
CAUTION
• This function is available only for the 705 model series.
1
Go to "MENU" > "Setup" > "Software
update".
2 Press ; and then insert the USB device
containing the software update file.
CAUTION
• Be sure to insert the USB device correctly into the terminal.
Information on the software license for this product
Software composition
The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by
third parties.
Software developed by SHARP and open source software
The copyrights for the software components and various relevant documents included with this product that were developed or written
by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also
makes use of freely distributed software and software components whose copyrights are held by third parties. These include software
components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other
license agreement.
Obtaining source code
Some of the open source software licensors require the distributor to provide the source code with the executable software components.
GPL and LGPL include similar requirements. For information on obtaining the source code for the open source software and for obtaining
the GPL, LGPL, and other license agreement information, visit the following website:
http://www.sharp-eu.com/gpl/
We are unable to answer any questions about the source code for the open source software. The source code for the software
components whose copyrights are held by SHARP is not distributed.
Acknowledgements
The following open source software components are included in this product:
• linux kernel • busy box • uClibc • zlib • libpng • libjpeg • mtd-utils
3
The TV displays a confirmation screen while
checking the data in the inserted USB device.
CAUTION
• If the data is not compatible with the system, an error message
appears on the screen. Repeat steps 2 and 3 after pressing
;.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB memory has two or more software update files.
• No data for updating the system exists in the USB
memory.
• The software update file is broken.
• The software update file is not compatible with your TV's
software.
• The current system is same as the system update data.
4
The TV displays the software version
information after checking the data.
Press c/d to select "Yes" to update the
5
system, and then press ;.
6 Press ; to automatically reset and start the
update operation.
• This operation may take a while.
The TV starts updating the system
A confirmation message appears on the
screen after completing the update and
then automatically restarts the TV. Press
; to complete the operation.
43