Restart The Dph-300 - D-Link DPH-300 User Manual

Restart the DPH-300

Restart the DPH-300
Once you have completed the Setup Wizard to configure the DPH-300 for its
Internet connection, you will need to save the settings and restart the DPH-300
before the settings become active. When you have restarted the DPH-300, it
will automatically connect to the D-Link IP Network Manager and complete the
auto-provisioning process.
Click the Restart button to save the settings and restart the router.
You will now be able to connect the DPH-300 to the Internet so it can contact
the SIP server and make telephone calls over the Internet using VoIP
technology.
Connect the DPH-300 to an available Ethernet port on your broadband router or
modem and use your VoIP telephone. You will hear a short tone on the
telephone after you have dialed a number to indicate that the DPH-300 has
successfully connected to the SIP server (registered) and the Power/Status LED
will glow continuously.
D-Link Corporation
DPH-300 User's Manual
27