Getting Started - D-Link DPH-300 User Manual

DPH-300 User's Manual

Getting Started

Getting Started
BEFORE YOU BEGIN!
Charge the handset batteries (see page 4).
Read the Opening Ports on Routers and Gateways section of this manual if you are
using the DPH-300 with a router or gateway.
The DPH-300 needs to be setup before use. You can use the Quick
Installation Guide (included with the DPH-300) to perfor m the hardware
installation. There is an easy to use setup Wizard built-in to the DPH-300 to accomplish
the IP address setup. You will need to run the Wizard and enter your Internet connection
information in order to use your phone for IP calling only if you do not have access to
Dynamic IP Addressing.
Dynamic IP Address is the default setting and requires no user changes.
If you have Dynamic IP Addressing (also called, "DHCP"), check the Quick
Installation Guide for information on the physical connection of the DPH-300, and
skip to page 28 of this document: Auto-provisioning. Otherwise, continue to the
next section.
D-Link Corporation
20