Periodic Maintenance - General International MAXI-LATHE VS+ 25-200 Setup & Operation Manual

PERIODIC MAINTENANCE

•
Keep the unit clean and free of dust by wiping with a cloth or vacuuming off any woodchips or dust after
each use.
•
All bearings are sealed and permanently lubricated and no further lubrication is required.
• Regular applications of any after-market surface protectant or rust inhibitor will help prevent rust and keep the
tool rest, head, and tailstock sliding smooth on the bedway.
•
Always turn off and unplug the lathe when you have completed turning and to avoid unauthorized use,
remove the switch key and store it in a safe place.
• Periodically inspect the power cord and plug for damage. Replace the power cord and the plug at the first
signs of visible damage.
NOTES
14