Preparing The Cpu Card For Baseboard Installation - Asus C-PKND User Manual

III. INSTALLATION

Preparing the CPU Card for Baseboard Installation

WARNING! Before handling any component, discharge static electricity from
your body by using a grounded wrist strap or by touching the unpainted metal
part of an object, such as a computer system case or power supply case. While
working on the CPU card, ground yourself frequently to discharge any static
electricity that may have accumulated in your body.
NOTE: The numbers in parentheses and in boldface in the following and succeed-
ing steps pertains to the item number as indicated in the component list on page 12.
1. Install the Top Support Bar: Place the top support bar (1) over the top edge of the
CPU card. Secure the bar in place, starting at the middle, with a pan head washer
screw (2), and then on both sides, with pan head screws (3) and the plastic rings (4).
4
3
2. Install the Guide Plate: Secure the guide plate (5) in place on the edge of the
CPU card with the pan head washer screws (2).
2
ASUS C-PKND User's Manual
4
3
1
2
5
2
13