Asus C-PKND User Manual page 21

Table of Contents

Advertisement

III. INSTALLATION
6. Secure the card by inserting and tightening the pan trim head washer screw (9)
into the CPU card expansion port slot and the bottom retainer screw (10) into
the system case. Install the support bar bracket (11) appropriate to your system
case if needed. You may have to drill a hole to the system case to accommodate
the bracket. If so, remove your CPU card first before drilling and be sure that the
baseboard is protected from the drilling. Then, repeat steps 5 and 6.
10
11
7. If you have other components, such as video, audio, and SCSI cards, to install,
install them now. Refer to the respective components' documentation for instal-
lation procedures. Otherwise, proceed to the next step.
8. Lift the system case so that it sits upright.
You are now finished with the installation. You may now proceed to the next step,
"Power Connection Procedures."
ASUS C-PKND User's Manual
9
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents